WARNING:
Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in
Before working inside your
follow the instructions in
safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Topics:
•
Procedure
•
Post-requisites
Procedure
1
Place the touch pad on the palm-rest assembly.
2
Slide the tabs on the touch-pad bracket into the slots on the palm-rest
assembly.
3
Slide the touch-pad cable into the connector on the touch pad and close the
latch to secure the cable.
4
Align the screw holes on the touch-pad bracket with the screw holes on the
palm-rest assembly.
5
Replace the screws that secure the touch-pad bracket to the palm-rest
assembly.
6
Adhere the tape over the touch-pad bracket.
Post-requisites
1
Replace the
system
2
Replace the
heat-sink
3
Replace the
I\O
4
Replace the
wireless
5
Replace the
memory
Replacing the touch pad
computer. After working inside your computer,
After working inside your
board.
assembly.
board.
card.
module.
computer. For more
Replacing the touch pad
32
76