Replacing The Base Cover; Procedure; Post-Requisites - Dell Inspiron 15 Service Manual

WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in
Before working inside your
follow the instructions in
safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Topics:
•

Procedure

•

Post-requisites

Procedure
1 Align the optical-drive interposer with the tabs on the base cover and snap it
into place.
2 Turn the base cover over.
3 Slide the tabs on the base cover into the slots on the palm-rest assembly and
snap the base cover into place.
4 Replace the screws that secure the base cover to the palm-rest assembly.
5 Turn the computer over.
6 Open the display and replace the screws that secure the palm-rest assembly to
the base cover.
7 Slide the optical-drive cable into its connector and close the latch to secure
the cable.
Post-requisites
1 Replace the keyboard.
2 Follow the procedure from step 4 to step 5 in "Replacing the
3 Replace the battery.

Replacing the base cover

computer. After working inside your computer,
After working inside your computer. For more
optical
Replacing the base cover
10
drive".
29