9
Remove the
Procedure
1
Turn the computer over and open the display as far as possible.
2
Open the latches and disconnect the power-button board cable and touch-pad
cable from the system board.
1
latches (2)
3
palm-rest assembly
3
Close the display and turn the computer over.
4
Disconnect the speaker cable from the system board.
5
Remove the screw that secures the display hinge to the system board.
6
Open the display hinge to an angle of 90 degrees.
heat-sink
assembly.
2
power-button board cable
4
touch-pad cable
Removing the system board
65