Replacing the display panel
WARNING:
Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in
Before working inside your
follow the instructions in
safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Topics:
•
Procedure
•
Post-requisites
Procedure
1
Slide the display cable into the connector on the display back-cover and close
the latch to secure the cable.
2
Adhere the tape that secures the display cable to the display back-cover.
3
Turn the display panel over and place it on the display back-cover.
4
Align the screw holes on the display panel with the screw holes on the display
back-cover.
5
Replace the screws that secure the display panel to the display back-cover.
Post-requisites
1
Replace the
display
2
Replace the
display
3
Replace the
system
4
Replace the
heat-sink
5
Replace the
I/O
6
Replace the
wireless
7
Replace the
memory
8
Follow the procedure from step 4 to step 6 in "Replacing the
computer. After working inside your computer,
After working inside your
bezel.
assembly.
board.
assembly.
board.
card.
module.
computer. For more
hard
Replacing the display panel
40
drive".
97