Heat & Glo 6000CLX-IPI-T Owner's Manual page 79

B. Vent Components Diagrams (continued)
Required Wire Harness
DESCRIPTION
10 FT PV Wire Harness
20 FT PV Wire Harness
40 FT PV Wire Harness
60 FT PV Wire Harness
80 FT PV Wire Harness
100 FT PV Wire Harness
Figure 16.12 PVLP-SLP Vent Components
Heat & Glo • 6000CLX-IPI-S, 6000CLX-IPI-T, 8000CLX-S, 8000CLX-IPI-T • 2166-900 Rev. AN • 2/16
Front View
15-1/2 IN.
394 mm
14 IN.
356 mm
11-1/2 IN.
292 mm
PART NUMBER
PVI-WH10
PVI-WH20
PVI-WH40
PVI-WH60
PVI-WH80
PVI-WH100
PVLP-BEK
Brick Kit
Top View
6-1/4 IN.
159 mm
1-1/2 IN.
38 mm
Side View
8 IN.
203 mm
4-3/8 IN.
112 mm
Note: Wire harnesses required to power the PVLP-SLP
connect to the appliance and are ordered separately from
PVLP-SLP. Contact your dealer to order.
Note: The PVLP-SLP requires a PVLP-CK be installed
on this appliance. The PVLP-CK is ordered separately
from the PVLP-SLP. Contact your dealer to order.
Note: A PVLP-HS heat shield is available and sold
separately. Use if the PVLP-SLP is installed in a high traffic
area.
PVLP-HS
Heat Shield
2-1/4 IN.
57 mm
4-3/4 IN.
121 mm
5-1/4 IN.
135 mm
10 IN.
2-1/4 IN.
254 mm
57 mm
9-1/2 IN.
241 mm
79