Connecting Power Supply; Aus - Medion P5110 D User Manual

Connecting power supply

Finally, connect your PC and monitor to the power supply.
− Plug the mains cable into the socket and then connect it to the mains
cable socket
Please observe the following safety information:
DANGER!
Risk of electric shock!
Even when the mains switch
are live.
− Pull the mains plug out of the socket to disconnect your PC
from the power supply and isolate the device entirely from
voltage sources.
− The mains plug socket must be near the PC and easy to reach.
− Only operate the PC on earthed, domestic power supply
sockets.
− Use only the mains cable supplied.
− For extra safety, we recommend using an overvoltage
protection device to prevent your PC from sustaining damage
from the mains supply as a result of power surges or lightning
strikes.
− The standard PC mains adapter has an on and an off switch
. These can be used to switch the PC on and off. When the
5
switch is at the OFF (0) setting, no power is being supplied.
− Please read the next section fi rst to fi nd out what you need to look out for
during start-up.
AFTER SALES SUPPORT
1300 884 987

AUS

on your PC.
5
1
Do not start up your PC yet!
is off, some components of the device
AUS
Connecting
23
www.medion.com.au