Setting Up The Pc; Installation Location; Environmental Requirements; Ergonomics - Medion P5110 D User Manual

AUS

Setting up the PC

Setting up the PC

Setting up your PC in the right way helps to ensure that your PC is comfortable
to operate.

Installation location

• Set up all components on a stable, level and vibration-free surface
and only operate them on a surface of this kind to prevent the PC from
malfunctioning.
• Keep your PC and all connected devices away from moisture and avoid
dust, heat and direct sunlight. This will avoid faults or damage to your PC.
• Your PC is not suitable for use at VDU workstations within the meaning of §2
of the German VDU workstation regulation.

Environmental requirements

• The PC can be operated at an ambient temperature of +10 °C to +35 °C and
at a relative humidity of 30% - 70% (non-condensing).
• When switched off, the PC can be stored at temperatures from -20 °C to
50 °C.
• During a thunderstorm, disconnect the mains plug and, in particular,
remove the network cable and, if applicable, the antenna cable. For extra
safety, we recommend using an overvoltage protection device to prevent
your PC from sustaining damage from the mains supply as a result of power
surges or lightning strikes.
• After transporting the PC, wait until it has reached ambient temperature
before switching it on. Major changes in temperature or fl uctuations in
humidity can cause moisture to build up within the PC due to condensation
– this can cause an electrical short circuit.

Ergonomics

Avoid dazzle, reflections and strong bright-dark contrast in
order to protect your eyes.
The monitor should never be placed next to a window because this is the
brightest part of the room in daylight. This brightness can make it more difficult
for the eyes to adjust to the darker monitor.
16
www.medion.com.au
AFTER SALES SUPPORT
1300 884 987
AUS