Notes For Service Technicians - Medion P5110 D User Manual

Notes for service technicians

− Before opening the housing, disconnect all power and connecting
cables. If the PC is not disconnected from the power supply before being
opened, there is a risk of fatal electric shock. There is also a risk that the
components could be damaged.
− Internal components of the PC may be damaged by electrostatic
discharge (ESD). Carry out repairs, as well as system enhancements or
modifi cations, at an ESD workplace. If such a workplace is not available,
wear an antistatic cuff or touch an earthed, metallic object. We will charge
for any repairs to damage caused by incorrect handling.
− Use only original replacement parts.
CAUTION!
Risk of explosion!
There is a lithium battery on the motherboard.
Batteries are special waste and must be disposed of properly.
− Never try to recharge the battery.
− Do not expose the battery to high temperatures or fire.
− Please note the polarity when changing the battery.
− Keep batteries away from children.
− Replace the battery only with the same type (CR 2032).
Information on laser radiation
• Laser equipment classifi ed as laser class 1 to laser class 3b can be used in
the PC. The equipment meets the requirements for laser class 1.
• By opening the housing of the optical drive, you will have access to laser
equipment classifi ed up to laser class 3b.
The following should be observed when removing and/or opening this laser
equipment:
• The integrated optical drive contains no parts that require repair or
maintenance.
• Repairs to the optical drive should only be carried out by the
manufacturer.
AFTER SALES SUPPORT
1300 884 987
AUS
Upgrading/modifying and repair
www.medion.com.au
AUS
41