Installing The Scale Pilot Truck; Lionel Service - Lionel 763e Hudson Owner's Manual

Lionel 763e hudson with vanderbilt tender 4-6-4 steam locomotive
Table of Contents

Advertisement

Adding fluid to your 763e Hudson's smoke generator
Y
our 763e Hudson is equipped with a
smoke generator that produces safe,
clean white smoke during operation.
The smoke generator requires the periodic
addition of Lionel smoke fluid in order to
function. Pierce the tube end with a pin, then
add four to eight drops of fluid directly into
the 763e Hudson's stack. Smoke production
will commence momentarily, faster if you
run your 763e Hudson at speed. When
smoke production wanes, add more fluid

Installing the scale pilot truck

Y
our 763e Hudson comes factory-
equipped with a three-rail pilot (front)
truck for opera-
tion. For display,
install the scale
pilot truck.
Place
your
763e upside down
on a soft, protec-
tive surface. Using
hobby
pliers,
remove the retain-
ing E-ring from
the center of the
truck.
Next,
remove the large

Lionel Service

Y
our Lionel 763e Hudson and Vanderbilt
tender is built with pride by Lionel and
carries a limited warranty to support contin-
ued reliable operation. If service is required,
contact your local Authorized Lionel Service
Center. To find the nearest Service Center,
simply call 1-800-4-LIONEL or visit our
website: www.lionel.com.
If you prefer a Lionel factory repair, call
810-949-4100, fax 810-949-5429, or write
Lionel Service, P.O. Box 748, New Baltimore,
MI 48047-0748. State the problem and the
Installing the three-rail pilot truck.
© 1996 L
LLC, C
IONEL
HESTERFIELD
U
S
NITED
TATES OF
(four to eight drops).
An idle 763e Hudson will not smoke;
press AUX1 and 9 (press for a maximum of
10 seconds) to engage the smoke generator
at idle/in neutral. Always keep a small
amount of smoke fluid in the 763e Hudson's
smoke generator; the generator's element
can become damaged if operated without
fluid. Smoke production is greater at higher
voltages and when the 763e Hudson is
pulling a heavy load or long consist.
slotted screw and washer at the rear of the
truck. Lift away the pilot truck, taking care to
product's purchase date. We'll send a return
authorization letter to assure proper han-
dling while at Lionel. You may choose to
have your product repaired by one of our
authorized Lionel Service Centers.CAU-
TION: Make sure your product is properly
packed to prevent shipping damage. The
shipment must be prepaid and we recom-
mend it be insured. Please follow the
instructions carefully. This warranty gives
you specific legal rights. You may have other
rights that vary from state to state.
MI 48051-2493
A
MERICA
keep
the
truck
spring in proper
position on the boss.
Now, install the
scale pilot
truck
over
the
boss.
Make
sure
the
screw mount is to
the rear. Reinstall
the retaining E-
ring. Finally, rein-
stall the large slot-
ted
screw
and
washer.

Advertisement

Table of Contents
loading

Table of Contents