Carrier A07049 Installation Instructions Manual page 2

TABLE OF CONTENTS
PAGE
SAFETY CONSIDERATIONS .................................... 1
INTRODUCTION .............................................. 2
INSTALLATION CONSIDERATIONS .............................. 3
INSTALLATION ............................................... 6
SYSTEM START-UP AND CHECKOUT .......................... 38
OPERATIONAL INFORMATION ................................ 41
TROUBLESHOOTING ......................................... 45
WIRING DIAGRAMS .......................................... 49
THERMOSTAT CONFIGURATION RECORD ...................... 58
SAFETY CONSIDERATIONS
Read and follow manufacturer instructions careflflly. Follow all local electrical
codes during installation. All wiring must conform to local and national electrical
codes. Improper wiring or installation may damage AC/HP Control.
Recognize safety information. This is the safety-alert symbol /_ . When you see
this symbol on the equipment and in the instruction manual, be alert to the
potential for personal injury.
Understand the signal words DANGER, WARNING, and CAUTION. These
words are used with the safety-alert symbol. DANGER identifies the most
serious hazards which will result in severe personal injury or death. WARNING
signifies a hazard which could result in personal injury or death. CAUTION is
used to identify unsafe practices which may result in minor personal injury or
product and property damage. NOTE is used to highlight suggestions which will
result in enhanced installation, reliability, or operation.