Die-cut label(Black mark) / Fanfold paper
When "Borderless Printing" is disabled
Vertical margins: 1.5 mm {0.06"} (Typical value)
Lateral margins:
1.5 mm {0.06"} (Typical value)
Perforated line
Auto-cut position
Auto-cut position
Perforated line
Auto-cut position
1.5 mm
{
}
0.06"
Outer edge
(Removed)
2.0 mm {
}
0.08"
The distance from the paper cut position to the black mark leading edge must be at least 1.5
mm {0.06"}. If it is less than 1.5 mm {0.06"}, the printer may be unable to print pages
because it fails to sense their black marks or skips them, etc.
The relation between the issuing pitch (Pm) and the interval of perforated lines (Ph) is as
follow:
Pm = Ph x integral multiple.
Paper width
1.5 mm
{
0.06"
Print area width
Paper feeding
direction
Print area
}
Label area
Paper
Outer edge
(Removed)
Black mark position
2.0 mm {
}
0.08"
Appendix
203