Epson TM-C7500 Series Technical Reference Manual page 133

• GS1 DataBar
 Module:
 Number of Characters:
• AztecCode
 Type:
 Cell Size:
 Number of Layers: Select the number of layers for AztecCode.
 Error Correction Area:
• DataMatrix
 Symbol Shape:
 Error Correction Level:
 Cell Size:
 Number of Vertical Cells:
 Number of Horizontal Cells:
3
Click [Add].
The selected 2D symbol font is saved and the font name is added to the font list.
 The 2D symbol font can be registered up to 30.
 The 2D symbol font setting can be overwritten by clicking [Save] after selecting the font
name from the font list and changing the setting.
 The 2D symbol font setting can be deleted by clicking [Delete] after selecting the font name
from the font list.
Sets the module width for GS1 DataBar.
"Recommended value of the module" on page 134
value.
Sets the maximum width for GS1 DataBar.
Set when GS1 DataBar Expanded Stacked is selected for the 2D symbol.
Select a mode for AztecCode.
Select the width of cell (module) for AztecCode.
"Recommended value of the module" on page 134
value.
[Minimize]: Optimize the minimum number of layers automatically.
[Specify the Size]: Change the number of layers specified by the value in
the input box.
Specify the error correction area of AztecCode using of either the follow-
ing. The data can be read even if the part of the symbol is broken, and res-
toration ratio becomes higher for bigger numbers.
[Auto]:Default value is 23%+3 code words.
[Specify a Percentage]: Specify the error correction area with a percentage
value in the input box.
Set when "Rectangle" is selected for the sample shape of DataMatrix.
Select an error correction level for DataMatrix.
Select the width of cell (module) for DataMatrix.
"Recommended value of the module" on page 134
value.
Specify the number of cells for DataMatrix in the vertical direction.
Set when "Rectangle" is selected for the sample shape of DataMatrix.
Specify the number of cells for DataMatrix in the horizontal direction. Set
when "Rectangle" is selected for the sample shape of DataMatrix.
[Minimize]: Optimize the minimum number of cells automatically.
[Specify the Size]: Change settings to the selected size.
Chapter 3 Handling
for the recommended
for the recommended
for the recommended
133
3