Epson TM-C7500 Series Technical Reference Manual page 128

• A special character is indicated by combining '{' and the next character.
Control Character
GS1-128
• '()' is the delimiter for the application identifiers. (printed as the HRI character, but not encoded.)
• The start codes (CODE A, CODE B, CODE C) and the stop code are added automatically.
• A symbol character FNC1, that is described after the start code, is automatically added.
• When '*' is specified, it is skipped.
• 2 digits of consecutive numbers must be specified as the application identifier. If it is not specified
correctly, an error occurs.
• A special character is indicated by combining '{' and the next character.
• When the character right after '{' is not any of the following, an error occurs.
Control Character
Control Character (00h ~ 1Fh, 7Fh)
Left parenthesis for the application identifier
Right parenthesis for the application identifier
128
SHIFT
CODE A
CODE B
CODE C
FNC1
FNC2
FNC3
FNC4
'{'
FNC1
'{'
'('
')'
'*'
Skipped character
ASCII HRI Character
{S Not printed.
{A Not printed.
{B Not printed.
{C Not printed.
{1 Not printed.
{2 Not printed.
{3 Not printed.
{4 Not printed.
{{ '{' is printed.
ASCII HRI Character
Space is printed.
{1 Space is printed.
{{ '{' is printed.
{( '(' is printed.
{) ')' is printed.
{* '*' is printed.
( '(' is printed.
) ')' is printed.
* Not printed.