INSTALLING YOUR MICROWAVE OVEN
Place the oven on a flat level surface 85 cm above the floor. The surface should be strong
enough to safety bear the weight of the oven.
NOT FOR BUILT-IN INSTALLATION
1. When you install your oven, make sure there is
adequate ventilation for your oven by leaving
at least 10 cm (4 inches) of space behind and,
on the sides of the oven and 20 cm (8 inches)
of space above.
2. Remove all packing materials inside the oven.
3. Install the roller ring and turntable. Check that
the turntable rotates freely. (Turntable type
4. This microwave oven has to be positioned so that plug is accessible.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent
or similarly qualified persons in order to avoid a hazard. For your personal safety, plug the
cable into a proper AC earthed socket.
Do not install the microwave oven in hot or damp surroundings like next to a traditional
oven or radiator. The power supply specifications of the oven must be respected and any
extension cable used must be of the same standard as the power cable supplied with the
oven. Wipe the interior and the door seal with a damp cloth before using your microwave
oven for the first time.
CLEANING THE TURNTABLE AND ROLLER
Clean the roller rings periodically and wash the turntable as required. You can wash the
turntable safely in your dishwasher.
20 cm above
10 cm behind
85 cm of the
SAVE THESE INSTRUCTIONS
10 cm on
6/25/2015 3:44:35 PM