Table of Contents
Advertisement
Installing Your Microwave Oven
Place the oven on a flat level surface 85cm above the floor. The
EN
surface should be strong enough to safety bear the weight of the oven.
1. When you install your oven, make sure there is adequate
20cm
10cm
above
behind
ventilation for your oven by leaving at least 10 cm (4
inches) of space behind and, on the sides of the oven
and 20 cm (8 inches) of space above.
85cm of
10cm on
the floor
the side
2. Remove all packing materials inside the oven.
Install the roller ring and turntable.
Check that the turntable rotates freely.
3. This microwave oven has to be positioned so that plug is
accessible.
If the supply cord is damaged, it must be replaced by a special
cord or assembly available from the manufacturer or its service
agent.
For your personal safety, plug the cable into a 3-pin, 240 Volt,
50Hz, AC earthed socket. If the power cable of this appliance is
damaged, it must be replaced by a special cable.
Do not install the microwave oven in hot or damp surroundings
like next to a traditional oven or radiator. The power supply
specifications of the oven must be respected and any extension
cable used must be of the same standard as the power cable
supplied with the oven. Wipe the interior and the door seal with a
damp cloth before using your microwave oven for the first time.
Setting the Time
Your microwave oven has an inbuilt clock. The time can be displayed
in either the 24-hour or 12-hour notation. You must set the clock:
•
When you first install your microwave oven
•
After a power failure
u
Do not forget to reset the clock when you switch to and from summer or
winter time.
1. To display the
time in the..
24-hour notation
12-hour notation
2. Turn the TIME/WEIGHT (
3. Press the
4. Turn the TIME/WEIGHT (
5. Press the
6
Then press the
button(
)..
Once
Twice
) dial to set hour.
button.
) dial to set minute.
button.
Advertisement
Table of Contents
