Sailor RE2100 Technical Manual page 46

3 SERVICE
SSB ATTACK
A = 0.5V/div
B = 5V /div.
23. Set the timebase on the oscilloscope to 200 msecs/div.
24. Control that the oscilloscope displays the response shown in figure SSB decay.
SSB DECAY
A = 0.5V/div.
B = 5V /div.
25. Select test programme SP-04-7.
26. Set the timebase on the oscilloscope to 50 msecs/div.
27. Set the signal generator in amplitude modulation mode, modulating LF signal 1.0 kHz and
modulating index M = 0.3.
28. Control that the oscilloscope displays the response shown in figure AM attack and decay.
PAGE 3-16
20 msecs/div
200 msecs/div.
RE2100