Sailor RE2100 Technical Manual page 34

3 SERVICE
POWER SUPPLY:
Vout1
Vout2
Iout1
Iout2
E.g. 2 pcs. ELCANIC type
TESTBOX
To test all the functions of the RE2100 is very difficult when no transmitter T2130 is available. For that
reason S. P. Radio has developed and produced a testbox. When using this testbox it is possible in an
easy way to test all the inputs and outputs of the RE2100.
The testbox has a built-in AF amplifier, which makes it possible to connect a loudspeaker directly to the
testbox.
The testbox has a built-in unit to control the function of the SP-BUS output. By means of the built-in light
emitting diodes and switches it is possible to control all the functions of the RE2100.
Specification of measuring instruments, which can be connected to the testbox is given in the beginning
of this chapter, and to this list an 8 ohm loudspeaker can be added.
The below diagram shows the electric wiring inside the testbox:
COMPONENT LOCATION TESTBOX
PAGE 3-4
18V DC
18V DC
2 Amp DC
0.5 Amp DC
3010
RE2100