JUKI lbh-1790 series Engineer's Manual page 77

NO.
ACT timing adjustment at the start of 1st bar-
S59
tacking
This item adjusts needle thread tension output start
timing at 1st bar-tacking section.
ACT timing adjustment at the start of right
S60
overedging
This item adjusts needle thread tension output start
timing at right overedging section.
ACT timing adjustment at the start of 2nd
S61
bar-tacking
This item adjusts needle thread tension output start
timing at 2nd bar-tacking section.
Number of stitches of tie stitching at the start
S62
of sewing
This item sets number of stitches of tie stitching at
the start of sewing.
Sewing pitch of tie stitching at the start of
S63
sewing
This item sets sewing pitch pf tie stitching at the start
of sewing.
Tie stitching width at the start of sewing
S64
This item sets tie stitching width at the start of sewing.
Lengthwise compensation of tie stitching at
S65
the start of sewing
This item sets start position of tie stitching in
lengthwise direction at the start of sewing.
Crosswise compensation of tie stitching at
S66
the start of sewing
This item sets start position of tie stitching in crosswise
direction at the start of sewing.
Tie stitching width at the end of sewing
S67
This item sets tie stitching width at the end of sewing.
Number of stitches of tie stitching at the end
S68
of sewing
This item sets number of stitches of tie stitching at
the end of sewing.
Lengthwise compensation of tie stitching at
S69
the end of sewing
This item sets start position of tie stitching in
lengthwise direction at the end of sewing.
Crosswise compensation of tie stitching at
S70
the end of sewing
This item sets start position of tie stitching in crosswise
direction at the end of sewing.
* 1 : Displayed according to the shape
* 2 : Displayed when it is set to with edit. Refer to 12. Method of setting sewing data with/without edit (Instruction
Manual).
* 3 : Displayed when the function is selected.
Item
72
−
Setting range
-5 to 5
-5 to 5
-5 to 5
0 to 8
0.00 to 0.70
0.0 to 3.0
0.0 to 5.0
0.0 to 2.0
0.1 to 1.5
0 to 8
0.0 to 5.0
0.0 to 2.0
−
Edit unit Remarks
1 stitch *2
1 stitch *2
1 stitch *2
1 stitch –
0.05mm *2
0.1mm –
0.1mm *2
0.1mm *2
0.1mm –
1 stitch –
0.1mm *2
0.1mm *2