Transport And Storage Precautions - INNO VIEW 5 User Manual

Transport and storage precautions

When the splicer is moved from cold to warm environment, you should allow the
•
splicer to warm up gradually. Otherwise, the condensation generated inside will
bring harmful effects to the splicer.
Pack the fusion splicer well for long time storage.
•
Keep the splicer clean and dry.
•
The splicer is precision adjusted and aligned. Always keep the splicer in its
•
carrying case to protect from damage and dirt. Put cushion package outside the
carrying case for long distance transportation.
Always avoid leaving the splicer in direct sunlight or expose to excessive heat.
•
DO NOT store the splicer in dusty or humid environment. This may result in
•
electric shock, splicer malfunction or poor splicing performance.
Keep the humidity to a minimum level where the splicer is stored. The humidity
•
must not exceed 95%.
Chapter 2 Installation 13