Final Work - Webasto Thermo Top E Installation Instructions Manual

Final Work

WARNING!
Reassemble the disassembled components in reverse order.
Check all hoses, clamps and all electrical connections for firm seating.
Secure all loose cables using cable ties.
Only use manufacturer-approved coolant.
Spray the heater unit components with anti-corrosion wax (Tectyl 100K, Order No. 111329).
- Connect the battery
- Fill and bleed the coolant circuit according to the vehicle manufacturer's specifications.
- Set the digital timer.
- Make settings on A/C control panel according to the "Operating Instructions for End Customer".
- Check the proper operation of the additional heater, see the operating instructions/installation in-
structions.
- Attach the "Switch off additional heater before refueling" sticker to the left-hand B-pillar.
Adjust the sensitivity of the passenger compartment monitoring
WARNING!
Observe the valid repair manual of the respective vehicle.
- Connect the VAG tester
- Open Item 46 (Central Module of Comfort System)
- Go to Item 10 (Adjustment)
- Follow the request for the code entry and enter the code 15
- Reduce the sensitivity of the passenger compartment monitoring to 50 %
- Save this setting
- The adjustment of the sensitivity of the passenger compartment monitoring is completed.
9013722D_EN
Webasto AG
Postfach 80 - 82132 Stockdorf
Hotline 01805 / 932278 - Hotfax 0395 / 5592-353
http://www.webasto.de
Printed in Germany
VW Caddy
Feel the drive
06/2009 Printing: Stef-
fen
Adapta-
tion of Pas-
senger
Compart-
ment Moni-
toring