Dimplex XLF50 Owner's Manual page 15

Operation
Figure 7
I
→ Activated by pressing the
button on the remote.
C. Heat ON/OFF
Turns the heater On and Off.
→ Activated by pressing the
button on the remote or the
unit.
• Indicated by the
the setpoint temperature will
flash on the display, then the
intake temperature will be dis-
played before turning off.
! NOTE: After the heater is
switched off, there is a 2 minute
fan delay, where the fan will con-
tinue running before turning off.
! NOTE: The unit can be oper-
ated in Heat Only Mode. When
the unit is only running with the
heater, the
ously be displayed on the Display.
! NOTE: The heater may emit
A C D E F
J
Display
icon and
icon will continu-
G
a slight, harmless odor when first
used. This odor is a normal condi-
tion caused by initial heating of
internal heater parts and will not
occur again.
D Temperature Down
Decreases the temperature set-
ting.
→ Adjusted by repeatedly press-
ing the corresponding button
on the remote.*
• Indicated by setpoint tempera-
ture on the Display decreasing
and the speed of the fan de-
creasing to reduce the amount
of heat being projected into the
Figure 8
A
B
D
F
H
C
E
G
I
J
15