TYAN S1846 User Manual page 62

Chapter 4
BIOS Configuration
This option specifies the Enhanced Parallel Port specification version number
that is used in the system. This option only appears if the Parallel Port Mode
option is set to EPP. The settings are 1.7 or 1.9. Version 1.9 is common on
newer devices; consult your device's user information for the appropriate port
type. There are no default settings.
Parallel Port DMA Channel
This option is only available if the setting for the Parallel Port Mode option is
set to ECP and the OnBoard Parallel Port option is set to 378, 278, or 3BC. This
option sets the DMA channel used by the parallel port. The settings are 0
through 7 in increments of one.
Onboard IDE
This option specifies the IDE channel used by the onboard IDE control
ler. The settings are Disabled, Primary, Secondary, or Both.
62
http://www.tyan.com