Connecting To Your Tv; Basic Connection - Sony DVP-PQ2 Service Manual

Connecting to your TV

Connecting
You can enjoy standard quality picture and sound using this
the Player
connection. Before connecting, make sure that your TV is turned off.
To enjoy better picture and sound, refer to the Brown Side of this
manual. Refer also to the instruction manuals of the components to
be connected.

Basic connection

To VIDEO OUT To AUDIO OUT L
To AUDIO OUT R
White
Yellow Red
AC power
source (mains)
AC power
source (mains)
Yellow
Connect the audio/video cord (supplied).
Then, connect the player and the TV to an AC power source (mains).
TV
For European
models only:
To video input
Connect using the
EURO AV Adaptor
To audio input
(supplied).
Red White
Notes on connecting to your TV
• Do not connect this player directly to a
component such as a VCR. If you do, noise
may appear in the picture.
• When connecting this player to a monaural
TV, use a stereo-mono conversion cord (not
supplied).
To insert batteries in the remote
Slide open the cover. Insert two AA (R6) size
batteries by matching the + and – ends with
the markings inside the compartment, and
close the cover.
Connecting the EURO AV Adaptor
(For European models only)
Attach the Euro AV Adaptor (supplied) to your
TV. Then, connect the audio/video cord to the
corresponding jacks of the Euro AV Adaptor.
TV
Audio input (R)
Audio input (L)
Video input