Connecting The Player; Playing Discs; Using The Remote; Settings And Adjustments - Sony DVP-PQ2 Service Manual

CD/DVD Player
Operating Instructions
DVP-PQ2
© 2003 Sony Corporation Printed in Malaysia
3-082-452-12(1)
WARNING
To prevent fire or shock hazard, do not expose the
player to rain or moisture.
Connecting
To avoid electrical shock, do not open the cabinet.
the Player
Refer servicing to qualified personnel only.
Power cord (mains lead) must only be changed at a
qualified service shop.
CAUTIONS

Playing Discs

• The use of optical instruments with this product
will increase eye hazard. As the laser beam used in
DVD/VIDEO CD/CD/MP3
this CD/DVD player is harmful to eyes, do not
attempt to disassemble the cabinet.
Refer servicing to qualified personnel only.
• TO PREVENT ELECTRIC SHOCK, MATCH WIDE
Using the BLADE OF PLUG TO WIDE SLOT AND FULLY
INSERT.
Remote
PRECAUTIONS
SHUFFLE/REPEAT/AUDIO/
• The nameplate is located at the bottom of the
ANGLE/SUBTITLE/TVS
(surround)
player.
• To prevent fire or shock hazard, do not place
Settings and objects filled with liquids, such as vases, on the
apparatus.
Adjustments
For customers in the U.S.A.
Owner's Record
The model and serial numbers are located at the
Playing MP3 audio tracks
bottom of the player. Record the serial number in the
from a list
space provided below. Refer to them whenever you
call upon your Sony dealer regarding this product.
Model No. DVP-PQ2
Playable discs and special Serial No. ___________________
words
You are cautioned that any change or modifications
not expressly approved in this manual could void
Limiting Playback
your authority to operate this equipment.
Using the Design Sheet
Connecting Other
Components
Precautions
Troubleshooting
Note
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses, and can radiate radio
frequency energy and if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However,
there is no guarantee that interference will not occur
in a particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try
to correct the interference by one or more of the
following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and
receiver.
– Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
– Consult the dealer or an experienced radio/TV
technician for help.
For customers in the U.S.A. and Canada
This symbol is intended to alert the user
to the presence of uninsulated
"dangerous voltage" within the
product's enclosure that may be of
sufficient magnitude to constitute a risk
of electric shock to persons.
This symbol is intended to alert the user
to the presence of important operating
and maintenance (servicing) instructions
in the literature accompanying the
appliance.