Connecting To A Tv; Connecting To An Amplifier Equipped With A Dolby Digital Decoder - Sony DVP-FX700 Service Manual

Connecting to a TV

IN
V O L U M E P H O N E S A U D I O V I D E O LINE SELECT
Right side of unit
To AUDIO IN/OUT
NOTES:
• Refer to the owner's manual of your TV as well.
• Before you connect the DVD player to your TV, be sure to turn off the power and unplug both units from
the wall outlet before making any connections.
• Connect the DVD player to your TV directly. If you connect the DVD player to a VCR, the playback
picture will be distorted because DVD video discs are copy protected.

Connecting to an amplifier equipped with a Dolby Digital decoder

You must set the LINE SELECT
switch to the "Out" mode
Right side of unit
IN
V O L U M E P H O N E S A U D I O V I D E O LINE SELECT
To AUDIO IN/OUT
Optical cable (Not supplied)
To enjoy Dolby Digital sound from this DVD
player you need the following:
• DVD recorded in Dolby Digital
• 6 channel receiver equipped with a Dolby Digital
decoder, or Dolby Digital processor and power
receiver
• 5 speakers and 1 sub woofer
• Set the Digital Audio Output of this DVD player to
"Dolby Digital" from the SETUP menu
Right side of unit
OUT
DC IN 9.8V
S-VIDEO OUT
To S-VIDEO OUT
IN OUT DC IN 9.8V
V O L U M E P H O N E S A U D I O V I D E O LINE SELECT S-VIDEO OUT
To VIDEO IN/OUT
Amplifier equipped with a
OUT
DC IN 9.8V
Dolby Digital decoder
S-VIDEO OUT
To digital audio input
(optical)
If the TV has an S-video input, connect the DVD player
with the S-video cable. When using an S-video cable,
do not connect the yellow video cable.
To S-video input
You must set the LINE SELECT
switch to the "OUT" mode
To audio/video input
Audio/Video cable (Supplied)
57
Front speaker
(right)
Center
speaker
Front speaker
(left)
Manufactured under license from Dolby Laboratories.
"Dolby", "Pro Logic", and the double-D symbol are
trademarks of Dolby Laboratories.
58
1-27
TV or monitor with
audio/video inputs
Sub woofer
Rear speaker
(right surround)
Rear speaker
(left surround)