Sony DVP-PQ2 Service Manual page 58

2. CD
[2]
Select , insert CD disc, and press
ment will be made through the following steps, then adjusted val-
ues will be written to the EEPROM.
CD Adjustment Steps
1. Sled Tilt Reset
2. Disc Check Memory CD
3. Set Disc Type CD
4. Spdl Start
5. LD ON
6. Focus Error Check
7. Fcs ON 1 with PI Level Mesure
8. Auto Track Offset Adjust L0
9. Trv Level Check
10. Tracking ON
11. CLVA ON
12. Sled ON
13. Auto focus Blance Adjust
14. Auto Loop Filter Offset Adjust
15. Auto Focus Gain Adjust L0
16. Auto Focus Balance Adjust L0
17. Eq Boost Adjust
18. Auto Loop Filter Offset Adjust
19. Auto Track Gain Adjust
20. Copy Adjustment Data to LCD
21. RF Level Measure
22. All Servo Stop
[ENTER]
key, and the adjust-
3. DVD-DL (dual layer)
[3]
Select , insert DVD dual layer disc, and press
and the adjustment will be made through the following steps, then
adjusted values will be written to the EEPROM.
DVD Dual Layer Disc Adjustment Steps
1. Sled Tilt Reset
2. Disc Check Memory DL
3. Set Disc Type DL
DVD DL Layer 1 Adjust
4. Spdl Start
5. LD ON
6. Fcs ON 1 with PI Level Mesure
7. Auto Track Offset Adjust L1
8. Tracking ON
9. Clva ON
10. Sled ON
11. Auto Focus Balance Adjust
12. Auto Focus Gain Adjust L1
13. Auto Focus Balance Adjust L1
14. Eq Boost Adjust L1
15. Auto Track Gain Adjust L1
DVD DL Layer 0 Adjust
16. Focus Jump (L1 Æ L0)
17. Auto Track Offset Adjust L0
18. Tracking ON
19. Clva ON
20. Sled ON
21. Auto Focus Balance Adjust
22. Auto Focus Gain Adjust L0
23. Auto Focus Balance Adjust L0
24. Eq Boost Adjust L0
25. Auto Track Gain Adjust L0
26. All Servo Stop
4. LCD (SACD)
No adjustments, because the adjusted data of CD are reflected to
LCD disc and the adjusted data of CD and DVD-DL are reflected
to SACD (hybrid disc).
6-6
[ENTER]
key,