Sony DVP-PQ2 Service Manual page 14

Using the
Remote
✎
To change the playing mode, sound
effect, and display, or to use the DVD's
menu.
c
"Functions"
✎
To read disc information on the screen.
c
"Reading the screen"
Remote
The letters below correspond to the letters in
"Functions." Use the letters to quickly find the
buttons needed for each operation.
Press to
C
turn the
player on.
=/1
B
REPEAT SUR
Press to
SHUFFLE AUDIO TV VOL adjust the
+
volume of
D
SUBTITLE ANGLE Sony TVs.
−
PREV NEXT CLEAR Press to
. >
cancel the
SCAN/SLOW REPLAY
current
m M
mode.
A
PAUSE
STOP
PLAY
X
H x
TOP MENU MENU
DISPLAY RETURN
O
E F
ENTER
There is a tactile dot on H and the "+" button of
TV VOL.
Functions
Note
Some playback features of DVDs and VIDEO CDs described in the following may be prohibited
by the software producers. Refer to the instructions supplied with the DVDs and VIDEO CDs.
Basic operations (A)
To Press
H
play
x
stop
X
pause
> NEXT or .PREV during playback.
go to the next or
previous title or
track
My or m y
scan forward or during playback.
backward Press the button repeatedly to change the speed.
To return to normal playback, press H.
My or m
y
play forward or during pause. (DVD/VIDEO CD only.
backward in Functions only in the forward direction for VIDEO CDs.)
slow motion
Press the button repeatedly to change the playback speed.
To return to normal playback, press H.
replay REPLAY during playback. (DVD only)
Selecting the playing mode (B)
You can play a selected title or track randomly or repeatedly.
To cancel the operation, press the following button repeatedly to select "OFF" or
press CLEAR.
To Press
shuffle SHUFFLE repeatedly during playback. (DVD/VIDEO CD/CD
only)
repeat REPEAT repeatedly during playback.
When you select Repeat Play during Shuffle Play, Shuffle Play is
repeated.
Changing the sound (C)
You can change the audio language for DVDs recorded with multilingual tracks.
When listening to a Karaoke VIDEO CD, you can turn off the vocals. You can also
enjoy this player's surround effect mode.
To change Press
language/sound AUDIO repeatedly during playback to select from the options.
In DVDs: Select a language from the options on the screen.
(When a 4-digit number is displayed, check the number in the
"Language Code List" on the Brown Side of this manual.)
VIDEO CDs/CDs/DATA CDs:
• STEREO: To hear standard stereo sound.
• 1/L: To hear the sound of the left channel from both speakers.
• 2/R: To hear the sound of the right channel from both speakers.
Super VCDs:
(The number before the colon shows the number of the audio
track being played. For the meaning after the colon, see above.)
• 1: STEREO
• 1: 1/L
• 1: 2/R
TV Virtual SUR repeatedly during playback to select from the following.
Surround settings (DVD only)
To cancel the surround setting, press SUR repeatedly to select
Notes
"OFF."
• The surround mode
•TVS DYNAMIC: To enjoy the surround effect with your TV's
signals are only
speakers. The distinct sound imaging effect is as if you have a
output when the
player is connected set of additional speakers next to you.
via the AUDIO OUT
• TVS WIDE: To enjoy the surround effect with your TV's
L/R jack.
speakers. The sound imaging effect is as if you have five sets
• Set the surround
of virtual speakers filling the area surrounding you.
settings of the
connected
• TVS NIGHT: To enjoy the surround mode at a lower volume.
components (such as
(Dolby Digital audio DVD only)
TV) to off.
• Surround does not • TVS STANDARD: To enjoy the surround effect with a set of
function when a disc
front speakers connected to the player. The imaging effect is as
has no rear signal.
if you have three sets of additional speakers around you.
• 2: STEREO
• 2: 1/L
• 2: 2/R