Viewing Traditional (Analog) Or Digital Tv; Adjusting Sound Settings; Adjusting The Volume; Mute Setting - BenQ SH Series Installation And Operation Manual

• These options will only appear when corresponding signals are connected to
the display. DTV will only appear when the optional DTV tuner is installed.
• If both Composite Video (AV) and S-Video signals are connected to the AV input
at the same time, only S-Video input will be displayed. If you wish to view the
Composite Video (AV) input in such case, remove the S-Video connection
temporarily.
• Be aware that the HDMI input signal must be HDCP-compliant to be displayed
properly. When switching to the HDMI inputs, the display needs approximately 3
seconds to detect the HDCP information from the signal source and no image
will be displayed during this period. This is not a malfunction.
• When displaying PC video, remember to switch the PC video output setting
from monitor display to external device. For more information, refer to the
documentations of your PC.

Viewing traditional (analog) or digital TV

You can press 電視 / 數位電視 (TV/DTV)
switch to the traditional (analog) TV mode and view TV or CATV programs,
or press it once more to switch to the digital TV mode and view digital TV
programs.
The digital TV function requires a separate DTV tuner with available digital TV
signal connected.

Adjusting sound settings

Adjusting the volume

• Press 音量 (Volume)
volume indicator will increase in length as volume rises.
• Press 音量 (Volume) -
volume indicator will decrease in length as volume falls.

Mute setting

靜音 (Mute)
Press
靜音 (Mute)
Press
sound level.

MTS (TV Sound selection)

Press 雙語 (MTS)
modes. (The modes available will depend on the TV or Video sound system
being received).

Turning on/off the Surround sound effect

You can press 環繞音效 (Surround)
the display's SRS TruSurround XT sound effect. The SRS TruSurround XT
sound technology makes it possible for the display to deliver true-to-life
sounds by simulating multi-channel audio output. It also helps to enhance
the clarity of verbal conversations.

Selecting a preset EQ mode

Press 音場效果 (EQ Mode)
(Equalizer) mode according to your preference.
+ or + on the remote control to increase volume. The
or - on the remote control to decrease volume. The
on the remote control to turn off the sound temporarily.
once more, or press
on the remote control to toggle TV sound among available
on the remote control to turn on or off
on the remote control to select a suitable EQ
on the remote control to directly
音量 (Volume)
+ or + to restore the
Using the remote control 9