Adjusting The Brightness; Setting Up Personal Picture Mode - BenQ SH Series Installation And Operation Manual

Adjusting the brightness

1. Set the brightness to the lowest level.
2. Gradually increase the brightness level until you reach the point where the
details in the dark areas of the image can be seen clearly. Do not further
increase the brightness level to avoid the black areas from looking grayish.

Setting up Personal Picture mode

You can adjust the settings in the
Personal Picture Mode. You can press
remote control to select these modes directly.
1. Press 目錄 (Menu)
2. Press + or
3. Press or
Personal
4. Press or
and then press
5. Press 目錄 (Menu)
22 On-Screen Display (OSD) menu
to display the OSD menu on-screen.
- to select Picture , and then press
to select Picture Mode
.
to select Contrast
+ -
or to adjust the settings to your satisfaction.
to save the settings and close the OSD menu.
Picture menu and save them as your
影像模式 (Picture Mode)
OK to enter the Picture menu.
, and then press
, Brightness , Color
on the
+ or - to select
, Sharpness ..., etc.,