Navigating The Osd Menu; Operations In The Osd Menu - BenQ SH Series Installation And Operation Manual

Navigating the OSD menu

You can use the On-Screen Display (OSD) menu to adjust the settings on
your display. To display the OSD menu, press
control (the main OSD menu of the SH series display is shown below):
Audio

Operations in the OSD menu

• Press ,
OK
• Press to confirm your selection or enter an submenu (if available).
• Press 回上頁 (Back)
• Press 目錄 (Menu)
For example, to adjust picture sharpness:
16 On-Screen Display (OSD) menu
Picture Senseye
, + or - to make selections or change settings.
to return to the previous menu level.
to close the OSD menu.
1. Press MENU to display the OSD menu on-screen.
2. Press + or - to select
3. Press OK to enter the submenu.
4. Press or to select
5. Press + or - to make adjustment.
6. Press 回上頁 (Back)
7. Press 目錄 (Menu)
目錄 (Menu)
Window TV
Picture .
Sharpness .
to return to the previous menu level, or
to close the OSD menu.
on the remote
Setup