Choosing An Appropriate Picture Mode; Adjusting Screen Brightness Automatically (Bright Intelligence, Selected Models Only); Enabling Color Vision Accessibility (Color Weakness); Working With The Built-In Microphone - BenQ BL2785TC User Manual

3. Select an appropriate display mode. The setting will take effect immediately.

Choosing an appropriate picture mode

Your monitor provides various picture modes that are suitable for different types of images. See
Mode menu on page 37
Go to Mode for a desired picture mode.
If Low Blue Light Plus is preferred, select Low Blue Light Plus to enable it. And go to Eye
Care and Low Blue Light Plus to select one of the low blue light modes from the list.
Adjusting screen brightness automatically (Bright Intelligence,
selected models only)
The Bright Intelligence function works with certain picture modes only. If it is not available, its menu options will
become grayed out.
The built-in light sensor works with Bright Intelligence technology to detect the ambient light,
image brightness and contrast, and then balance the screen automatically. It helps keep image
details as well as to reduce eye strain.
To enable this function, go to Eye Care > Bright Intelligence > ON.
The performance of Bright Intelligence may be impacted by the light sources and the monitor tilt angle. You can
increase the light sensor sensitivity from
Sensor Sensitivity on page 39

Enabling color vision accessibility (Color Weakness)

Color Weakness is accessibility that helps people with color vision deficiency to distinguish
colors. You are provided with Red Filter and Green Filter on this monitor. Choose one as
needed.
1. Go to Eye Care > Color Weakness.
2. Choose either Red Filter or Green Filter.
3. Adjust the value of the filter. A stronger effect is produced as the value increases.

Working with the built-in microphone

If the video source is via USB-C™ port, you can press the MIC key to turn on the built-in
microphone. Check
To mute/unmute the microphone, press the MIC key.
To turn off the built-in microphone, go to Audio > Microphone > Status > OFF.
With the Noise Cancellation technology, the digital microphone filters out background noises
and transmits only clear vocals. To adjust the volume or change the settings, go to Audio >
Microphone. See
30 How to adjust your monitor
for all the available picture modes.
Eye Care
for more information.
MIC LED indicator on page 31
Microphone on page 44
> >
Bright Intelligence Sensor Sensitivity
for more information.
for more information.
if needed. See