Kenmore 790.7258 SERIES Use & Care Manual page 19

Setting Control for Silent Operation
The oven is set to operate with certain chimes and tones (default
settings) that alert the user to certain oven functions. The silent
operation feature allows the oven control to be operated
without sounds when necessary. By accessing user preferences,
this option can be later returned to operate with normal
programming sounds.
To set the oven control for silent operation:
1. Press and hold light for a few seconds until the display
sounds an acceptance chime. AUd should appear in the
display.
Figure 21: Silent/audio control display
2. If AUd is not showing, press the
appears and HI is showing in the display. This is the normal
(default) setting.
3. To turn the audible feature to a lower sound or completely
OFF, press the or
the display.
4. When the desired setting appears in the display, release the
key and wait for an acceptance chime.
5. To return to the time of day display, press and hold Light for
3 seconds until the display chimes and fades back to
showing the time of day.
Setting Oven Lock
When the Oven Lock is set, the door is locked along with the
oven controls and oven functions. If the user tries to set the oven
mode or temperature mode the control will signal and error
(triple beep).
To set Oven Lock:
1. Press and hold both the light key and clock key for about 3
seconds.
2. The control will beep and the motor door latch will begin to
close. Do not try to open the oven door while the
mechanism is locking. The door is locking/unlocking when
the lock icon is flashing
Figure 22: Press and hold Light and Clock keys
key until AUd
key until LO or OFF appears in
3. Once locked, a lock icon and LOC will appear in the
display.
4. To unlock the oven door, press and hold both the light key
and clock key for about 3 seconds. The lock icon will flash
and the motor door lock will begin unlocking the door. Do
not attempt to open the oven door while it is unlocking.
5. When the lock icon and LOC goes away, the door can be
opened and the oven controls will be available.
Setting the Timer
The two, minute timers in the oven display serve as extra timers
to help keep track of cooking functions. The timer cannot be
used during a self clean cycle or if the meat probe function
associated with the timer display is in use. The minimum timer
setting is 1 minute and the maximum setting is 11:59.
To set the timer:
1. Press either TIMER Set/Off key.
Figure 23: Setting the timer
2. The timer display will show
keys. If the key is pressed at this time an invalid key
chime will sound.
3. Press the key to begin to scroll to the desired setting.
If the key is held, the timer value will increase rapidly. Once
the desired setting is reached, release the key, press the
timer key again, and the timer will start counting down
automatically in a few seconds.
Figure 24: Setting the timer
4. The timer display will show the H:M icon if the timer is set
for more than 1 minute. If the value is under 1 minute, the
timer will display the time in seconds and the H:M icon will
not appear.
19
Oven Controls
0:00
and the and