Table of Contents
Advertisement
Oven Controls
User Preference Settings
The default (factory) settings include AUd (audible control
setting), ES (energy saving), UPO (User Programmable Offset)
for changing the oven temperature), and rSt (reset) for changing
user preference back to default settings.
User preferences are accessed by holding the light key for 3
seconds while the oven is in the idle mode and no timers are
active. Once activated, the user can make changes and scroll
through the menu of options described above. Specific instruc-
tions on how to set the available user preferences can be found
throughout this Oven Control section.
Minimum and Maximum Control Settings
Many of the features listed have minimum and maximum time
and temperature settings that may be entered into the control.
Table 2: Minimum and maximum control settings
Feature
Min. Temp. or Time Max. Temp. or Time
Bake
200°F (93°C)
550°F (288°C)
Accela-Heat
200°F (93°C)
550°F (288°C)
Broil
550°F (288°C)
Timer
0:01 Hr
11 Hrs. 59 Mins.
Clean
2 Hours
4 Hours
Conv Bake
200°F (93°C)
550°F (288°C)
Conv Roast
200°F (93°C)
550°F (288°C)
Meat Probe
140°F (60°C)
210°F (99°C)
Warm & Hold
170°F (77°C)
3 hours
Bread Proof
100°F (37°C)
110°F (43°C)
Clock (12hr)
1:00 Hr
12:59 Hr
Setting The Clock
The clock key is used to access the time of day setting. When
the oven is first plugged in or if there has been an interruption in
power to the range, 12:00 will flash in the display.
To set the correct time of day:
1.
Press the clock key.
2. The display will show a time along with a
and a
key in the display below.
3. Press either
or
key to scroll to the correct time
of day and release the key.
4. The control will accept the new set time with a chime, and
the control will show the time of day along with the two
timers that are available.
Important: The clock cannot be changed when the oven is set
for cooking or self clean is active. Only a 12 hour clock is
available on the Kenmore Professional model.
Changing Between Continuous Bake Setting or 12 Hour
Energy Saving
The oven control has a factory preset built-in 12 Hour Energy
Saving feature that will turn off the oven if the oven is left on for
more than 12 hours. The control may be programmed to
override this feature to bake continuously.
To change between continuous bake or 12 Hour Energy Saving
feature:
1.
Press and hold the light key for 3 seconds until the display
sounds an acceptance chime and shows one of the user
preferences.
2. Press the
or
key until ES appears and ON is
showing.
3. To turn the energy saving feature off, press the
or
key until OFF appears in the display.
4. The control will accept the change in a few seconds and
sound the acceptance chime. The oven is now set for contin-
uous cooking.
To return to the time of day display, press and hold the light key
for 3 seconds until the display chimes and fades back to
showing the time of day in the display. The control will return to
time of day after a short time out.
18
Hide quick links:
Advertisement
Table of Contents
