Accela-Heat - Kenmore 790.7258 SERIES Use & Care Manual

Oven Controls
5. When the timer ends, a reminder chime will sound and
repeat once every 60 seconds for a period of five minutes.
Before the user can program an expired timer again, the
timer key must be pressed.
6. To cancel the timer before the set time expires, press the
TIMER Set/Off key.
The minute timers will not start or stop the cooking process. The
minute timers can be used alone or while using most of the other
oven features.
Operating Oven Lights
The interior oven lights will automatically turn on when the oven
door is opened. The oven light will not operate during the self
clean, and it will remain off.
Press to turn the interior oven lights on and off whenever
the oven door is closed.
The interior oven lights are located in the rear of the oven
interior and are covered with a glass shield. The glass shield
protects the bulb from high temperatures and should always be
in place whenever the oven is in use. The oven light will not
operate during a self clean cycle.
To replace the interior oven light, see
Light" on page 36.
Important note:
For best baking results, do not leave the oven light on while
cooking.

Accela-Heat

Use the Accela-Heat feature whenever you wish to start baking
immediately, without the need for preheating. This feature
provides good results when preparing convenience foods, such
as cinnamon rolls, frozen pizza, bacon, french fries, and tater
tots. Food will finish baking in the time stated in the cooking
directions without the additional time ordinarily required for
preheating. During Accela-Heat, the fan will pulse on and off,
and the bake element will cycle on and off to maintain the set
temperature for precise baking.
Bake may be set for any oven temperature between 200°F
(93°C) to 550°F (288°C).
To set Accela-Heat:
Always use pot holders or oven mitts when using
the oven. When cooking, the oven interior, oven racks, and
cooktop will become very hot which can cause burns.
1. Remove food from packaging and arrange on a baking
pan.
2. Place pan in oven on either rack position 2 or 3
and close oven door. Accela-Heat is designed for baking on
a single oven rack placed in the center of the oven.
"Replacing the Oven
(Figure 25)
3. Turn the oven mode selector to the Accela-Heat position.
4. Turn the oven temperature selector to the desired tempera-
ture. Baking will immediately begin.
5. To stop baking turn oven mode knob to OFF. Also return
temperature selector knob to the OFF position.
Accela-Heat best practices:
• Always place the food in the oven on either rack position 2
or 3. Accela-Heat is designed for baking on a single oven
rack, placed in the center of the oven.
• When using Accela-Heat, use bakeware with low or no
sides. This allows the air to circulate around the food evenly.
• Food that comes in strips, such as fish sticks and chicken
tenders, should be placed on the pan with the ends pointing
to the sides of the oven.
• Follow the package directions for food preparation time
and temperature. Accela-Heat works best when cooking
foods longer than 10 minutes. If directions call for a shorter
cooking time, a few extra minutes may be required for
optimal cooking results.
• Do not open the oven door often. Opening the door will
reduce the temperature in the oven and may increase bake
time.
6
5
4
3
2
1
Figure 25: Oven rack positions
20