Samsung SCV-5085 User Manual page 35

- If the size is greater than the max size or smaller than the min size, motion is not detected.
To avoid false detection caused by noises, set the max/min detection size suitable for the
installation environment.
But the same movement in the same location can cause a different detection size. So,
include margins when you set the min/max detection size.
ExiT
Select a desired EXIT mode using the Function Setup switch depending on the
camera purpose.
y saVE : Save the current settings and exit the MAIN SETUP menu.
y noT saVE : Do not save the current settings and exit the MAIN SETUP menu.
y rEsET : Revert camera to factory settings. (The language, communication and
lens settings will remain the same).
English_35