Table of Contents
Advertisement
- TAMPERING : If the screen view
y SENSITIVITY : Set the sensitivity to tampering detection.
y ALARM OUT : Outputting of detection signals can be set.
EXTERNAL : Send signals through external terminals.
`
OSD : Display signals on the screen.
`
RETURN : Return to the TAMPERING menu.
`
y RETURN : Return to the VIDEO ANALYTICS menu.
M
`
In the following cases, the initially set tampering detection function can malfunction.
- In a monitoring environment with a simple background or an environment with low light level or at
night, the detection performance can deteriorate.
- Sudden changes in the lighting and severe camera shaking can be wrongly detected as tampering.
- Immediately after tampering, the camera tampering detection can take up to a max of five seconds.
- If camera tampering is detected, after some time(five sec), stabilization will be done before
restarting. During stabilization, there is no detection.
- MOTION : This product
generates signals
each time an object
movement is detected
in the four areas of
the screen so efficient
monitoring can be
achieved.
y DET. SIZE : Selects an object
y DET. AREA : Set the areas of
` SEL AREA : Select from four
` MODE : Determine whether to
is obstructed or the
camera location
is changed,
tampering
detection, you can
issue an event signal by setting it.
size to detect on the
screen.
motion detection.
areas that users
want.
TAMPERING
SENSITIVITY
▶
1.
ALARM OUT
2.
RETURN
3.
MOTION DET
DET. SIZE
▶
1.
DET. AREA
2.
NON DET. AREA
3.
4. INDICATOR
ALARM OUT
5.
RETURN
6.
MOTION DETECT AREA
SEL AREA
▶
1.
MODE
2.
SENSITIVITY
3.
TOP
4.
BOTTOM
5.
LEFT
6.
RIGHT
7.
RETURN
8.
MIDDLE
OFF
AREA
1
ON
5
----
----
1
--------
100
--------
1
--------
--------
100
English_31
Advertisement
Table of Contents
