Samsung SCV-5085 User Manual page 23

Table of Contents

Advertisement

ExPosurE
1. When the SETUP menu screen is displayed, select 'EXPOSURE' by using the
Function Setup switch so that the arrow indicates 'EXPOSURE'.
2. Select a desired mode using the
Function Setup switch.
y brighTnEss : Adjusts the video
y lEns : Using this function, you
can control the screen
brightness.
- DC : Select Auto Iris Lens.
y IRIS SPEED (DC) : Adjusts the Iris control speed of the DC lens. If the
y shuTTEr : You can select the shutter.
- MIN : 1 ~ 1/12000
- MAX : 1/60 ~ 1/12000(NTSC),1/50~1/12000(PAL)
- A.FLK : Select this when you experience picture flicker, this happen when
there is a clash with the installed lighting frequency.
`
The greater the shutter value the brighter the screen is but the more the residual images of
M
objects there are.
`
If the min shutter value is large, it can cause noise, spots and white areas but still operate normally.
`
If you do not use the AGC mode on the exposure menu, it cannot be set above 1/60(50)sec.
`
Depending on the setting range of the minimal/maximal shutter, the screen exposure can
become saturated.
y agC (off/loW/miDDlE/high) : The higher the gain level, the brighter the
y ssnr4 : This function reduces the background noise in a low luminance environment.
- OFF : Deactivates SSNR4. Noise is not reduced.
- ON : Activates SSNR4 so that noise is reduced.
`
M
When adjusting the noise reduction level in the SSNR4 mode, remember that the higher the level
set, the more the noise level will be reduced, as will the brightness of the image.
y rETurn : Return to the MAIN SETUP menu.
brightness.
control speed is too slow or fast, please use this menu to
adjust the speed.
screen - but the greater the noise.
EXPOSURE SETUP
BRIGHTNESS
1.
LENS
2.
SHUTTER
3.
AGC
4.
5. SSNR4
RETURN
6.
50
----
----
DC
HIGH
ON
English_23

Advertisement

Table of Contents
loading

Table of Contents