Disabling - Jøtul ERS 01 Operation And Maintenance Manual

Fig. 36 Sound options screen
Volume settings are made similarly as contrast and backlight
settings.
Disabling confirmation of knob movement by a sound signal
causes that the knob movements are not confirmed with
any sound signals. Settings of this parameter are made by
positioning the cursor in selection mode on the icon and
pushing the knob.
Enabling alarm sounds causes reporting alarm actions with a
sound signal. Disabling this option will activate quiet alarm:
only by blinking display. Alarms will not be confirmed by any
sound signal (regardless of volume potentiometer setting). This
parameter is activated by positioning the cursor in selection
mode on the icon and pushing the knob.

14.0 Disabling

Switches the regulator off. When this menu is selected, a
question whether to switch the regulator off is displayed.
Fig. 37 "Switching off" screen
When disabling function is confirmed by selecting YES, the
intake air throttle will be set to Throt.off/put down parameter
value (this parameter is described in chapter "Burning options").
However, if the water jacket temperature is higher than
Toperation value, the regulator will report the following
message: "Attempt of deactivating the regulator at high
temperature". Confirmation by selecting YES will cause
regulator to switch off and operation of pumps will be stopped.
The intake air throttle will be closed completely (in order to
prevent the fireplace from damaging).
Selecting NO will result in exiting to the main screen and further
operation of the regulator.
The regulator can also be switched off by
pushing the knob and holding it for 3 seconds
while the main screen is displayed. The Fig.
"Switching off" screen confirmation will be
displayed.
The regulator is equipped with an internal battery enabling
to close the throttle in case of supply shortage. After supply is
restored, the regulator will switch on automatically and start
operating.
ENGLISH
19