Handling Menu - Jøtul ERS 01 Operation And Maintenance Manual

ENGLISH

13.0 Handling menu

This menu is dedicated to the user. It enables to make basic
changes in regulator handling.
13.1 Handling\Settings menu
Consists of:
Rating plate - enables to read the information about a version
of device equipment and software.
Fig. 34 Electronic rating plate
Language - enables to change the language of descriptions. The
following language version are available: Polish, English, Czech,
German, Italian, French.
Encoder's direction - enables to invert reaction on turning the
knob in ellipsoid menu.
Delay - time of inactivity, in seconds, after which the menu is
exited automatically and screen and knob backlight is disabled
Menu speed - enables to set the animation rate of ellipsoid
menu
Ambiente light - enables to set encoder's pulsing backlight after
disabling a display (after timeout has elapsed). This function is
used in dark compartments. The encoder's backlight pulsing is
maintained after switching the regulator off.
18
13.2 Handling\Screen menu
This menu provides access to set screen options. Turning the
knob will result in switching between fields of backlight and
contrast settings.
Fig. 35 Display options screen
By turning the knob, set the marker (white picture on a black
background) on a desired position and push the knob in order to
activate edition mode (Digital value starts blinking).
Now, set the desired level of the parameter and confirm by
pushing the knob again. After this operation, the cursor is in
selection mode; next value can be now changed in similar way.
Reversing colors on the display - enables to switch on a display
negative function. All colors will be reversed.
After making changes, set the cursor on OK or CANCEL, and
accordingly confirm or discard changes. Setting both options
results in exiting to menu.
.
13.3 Handling\Volume menu
This menu provides access to sound settings in the regulator.