Control Panel Menu Structure; Dmx Mode; Dmx Starting Address; Slave Mode - Blizzard Lighting Stiletto 6 User Manual

Table of Contents

Advertisement

Control Panel Menu Structure

Main Function
Function
1
Info
2
Person
3
Reset
4
Adjust
5

DMX Mode

Allows the unit to be controlled by any universal DMX controller.

DMX Starting Address

1.) To assign a DMX staring address to the fixture, use the <UP/DOWN> buttons to scroll to
Function, and press the <ENTER> button. Then use the <UP/DOWN> buttons to display
Address, press <ENTER>, and use the <UP/DOWN> buttons to highlight any value desired
for the starting DMX address. Press the <ENTER> button to confirm your choice.

Slave Mode

1.) Disconnect fixture(s) from DMX signal source, and set all to matching DMX channel modes.
2.) For each fixture you want to run in slave mode, use the <UP/DOWN> buttons to navigate
to Function, and press <ENTER>. Then use the <UP/DOWN> buttons to navigate to Slave,
and press <ENTER> to confirm.
3.) Connect all fixtures together via DMX. The first fixture in the DMX chain will be the master
fixture, followed by the slave fixtures.
4.) Connect DMX controller to the master unit for DMX control.
Stiletto™ Z6 User Manual Rev. A
Sub Function
Address
CH Value
Slave
Auto
Music
Temp Inf
Head Tem
Soft Inf
Status
Pan Rev
Tilt Rev
P-Degree
M Speed
Mic Sens
Temp C/F
Default
Reset?
Password
Selection
What It Does...
=000 <-> XXX
Sets the DMX address
= XXX...
Displays all current DMX channel
values
= Slave
Sets the unit in slave mode.
= Alone
Sets the unit in auto mode
= Master
= Alone
Sets the unit in sound active mode
= Master
= XXX
Displays the current internal tem-
perature
= OFF / = ON
Displays the current software version
= OFF / = ON
Reverses the pan movement
= OFF / = ON
Reverses the tilt movement
=360 <-> 540
Pan rotation (360° or 540°)
Speed 1 / 2
Adjust Motor Speed (1=fast, 2=slow)
= 0% / = 99%
Adjust the sound active mic sensitivity
= F / = C
Display degrees as Fahrenheit or
Celsius
= OFF / = ON
Resets personalized settings to default
<ENTER>
Resets the fixture
=000 <-> 255
Password protected pan/tilt calibera-
tion settings. The password is: 050
Page 13
(c) 2015 Blizzard Lighting, LLC

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Stiletto z18

Table of Contents