Personal (Customized) Settings; Revert Custom Settings; Auto, Stand-Alone, Sound Active Modes; Auto Mode - Blizzard Lighting Stiletto 6 User Manual

Personal (Customized) Settings

1.) For manual/customized settings, navigate the control panel menu to highlight Person, and
press <ENTER>. Use the <UP/DOWN> buttons to highlight Status then press <ENTER>.
From here you can use the <UP/DOWN> buttons to turn on/off reverse pan (Pan Rev), or
reverse tilt (Tilt Rev), choose the pan rotation level of either 360° or 540° (P-Degree), adjust
the motor speed to fast or slow (M Speed), and adjust the internal mic sensitivity level from
0-99% (Mic Sens). When you are finished, press <ENTER> to confirm your changes.

Revert Custom Settings

1.) To revert customized settings back to the factory default, navigate the top level menu to
reach Person, and press <ENTER>. Then use the <UP/DOWN> buttons to highlight Default,
and press the <ENTER> button.
2.Highlight YES, then press <ENTER>.

Auto, Stand-Alone, Sound Active Modes:

Allows a single or Master/Slaved units to run factory installed programs at user selectable speeds.

Auto Mode

1.) Use the <UP/DOWN> button to scroll to Function, and press <ENTER>. Now use the
<UP/DOWN> buttons to highlight Auto (Alone or Master), and press the <ENTER> button.
2.) You can now adjust the motor speed if you like by navigating the top level menu to Person,
and press <ENTER>. Then use the <UP/DOWN> buttons to highlight Status, and press the
<ENTER> button.
3.) From here, use the <UP/DOWN> buttons to highlight M Speed, press <ENTER>, then use
the <UP/DOWN> buttons again to choose either Speed 1 (fast), or Speed 2 (slow).
4.) Press <ENTER> to confirm.

Sound Active Mode

1.) Use the <UP/DOWN> button to scroll to Function, and press <ENTER>. Now use the
<UP/DOWN> buttons to highlight Music (Alone or Master), and press the <ENTER> button.
2.) You can now adjust the mic sensitivity if you like by navigating the top level menu to
Person, and press <ENTER>. Use the <UP/DOWN> buttons to highlight Status, and press
the <ENTER> button.
3.) From here, use the <UP/DOWN> buttons to highlight Mic Sens, press <ENTER>, then
use the <UP/DOWN> buttons to choose a percentage level from 0% (off), to 99% (highest
level).
4.) Press <ENTER> to confirm
Stiletto™ Z6 User Manual Rev. A
Page 14
(c) 2015 Blizzard Lighting, LLC