Error Message - Olympus Stylus 1050 SW Instruction Manual

Hide thumbs Also See for Stylus 1050 SW:
Table of Contents

Advertisement

Error message

When one of the messages below is
displayed on the monitor, check the
corrective action.
Error message
Corrective action
q
Card problem
Insert a new card.
CARD ERROR
q
Card problem
Use a computer to cancel the
WRITE
read-only setting.
PROTECT
Internal memory problem
>
Insert a card.
MEMORY FULL
Erase unwanted images.
Card problem
q
Replace the card.
CARD FULL
Erase unwanted images.
Card problem
Use 12 to select [CLEAN
CARD], and press the
o button. Take out the card,
CARD SETUP
wipe the contact area (p. 64)
with a soft, dry cloth, and then
CLEAN CARD
load the card again.
FORMAT
Use 12 to select
SET
OK
[FORMAT], and press the
o button. Next, use 12
to select [YES], and press the
o button.
Internal memory problem
MEMORY SETUP
IN
Use 12 to select [MEMORY
FORMAT], and press the
POWER OFF
o button. Next, use 12
MEMORY FORMAT
to select [YES], and press the
SET
OK
o button.
Internal memory/Card problem
L
Take pictures before viewing
NO PICTURE
them.
Problem with selected image
Use photo retouch software,
r
etc. to view the image on a
PICTURE
computer. If the image still
ERROR
cannot be viewed, the image file
is corrupted.
*1
*1
*2
*2
Error message
r
Problem with selected image
THE IMAGE
Use photo retouch software, etc.
CANNOT
to edit the image on a computer.
BE EDITED
Operation problem
Close the battery/card
compartment cover.
CARD-COVER
OPEN
THE LENS
Operation problem
BARRIER IS
Slide the lens barrier down to
CLOSED
take a picture.
g
Battery problem
BATTERY
Charge the battery.
EMPTY
Connection problem
Connect the camera and
NO
computer or printer correctly.
CONNECTION
Printer problem
Load paper into the printer.
NO PAPER
Printer problem
Refill the ink in the printer.
NO INK
Printer problem
Remove the jammed paper.
JAMMED
Printer problem
SETTINGS
Return to the status where the
CHANGED
*3
printer can be used.
Printer problem
Turn off the camera and printer,
check the printer for any
problems, and then turn the
PRINT ERROR
power on again.
Problem with selected image
r
CANNOT PRINT
Use a computer to print.
*4
Before erasing important images, download them to
*1
a computer.
All data will be erased.
*2
This is displayed, for instance, when the printer's
*3
paper tray has been removed. Do not operate
the printer while making the print settings on the
camera.
This camera may be unable to print images taken by
*4
other cameras.
Corrective action
EN


Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mju 1050 sw

Table of Contents