Olympus Stylus 1050 SW Instruction Manual page 46

Using the alarm [ALARM CLOCK]
x SETUP  ALARM CLOCK
When [X] has not been set, [ALARM CLOCK] is not available.
When [jSILENT MODE] (p. 49) is set to [ON], the alarm will not sound.
When [DUALTIME] (p. 45) is set to [ON], the alarm is activated at the date and time set in
[DUALTIME].
Submenu 2
OFF
TIME
ONE TIME
SNOOZE
SOUND TYPE
VOLUME
(Submenus 3 and 4 can be set in the
DAILY
same way as [ONE TIME].)
The setting procedure is identical to that in "Setting the date and time" (p. 13).
*1
In this setting, even if the alarm is stopped once, it will be activated every 5 minutes, up to 7 times.
*2
To check the alarm time, press the g button while the camera is turned off. The current and
alarm set times are displayed for approx. 3 seconds.
To activate the alarm
After making the detailed settings of [ONE
TIME] or [DAILY], press the o button to
turn off the camera.
Selecting the video signal system to match your TV [VIDEO OUT]
x SETUP  VIDEO OUT
The TV video signal system varies depending on the countries and regions. Before viewing camera
images on your TV, select the video output according to your TV's video signal type.
Submenu 2
NTSC Connecting the camera to a TV in North America, Taiwan, Korea, Japan, and so on
PAL Connecting the camera to a TV in European countries, China, and so on
The factory default settings differ according to the region where the camera is sold.
 EN
Submenu 3 Submenu 4
— —
(Proceeds to
the time setting
screen .)
*1
*2
OFF/ON
1/2/3
LOW/HIGH
Application
The alarm is canceled.
The alarm is activated once according to the
selected time, sound and volume settings.
The alarm is activated daily at the same settings.
To stop the alarm
When the alarm is activated, press any button
to stop the alarm and turn off the camera.
When [SNOOZE] is set to [OFF], the alarm
stops automatically and the camera turns off
after 1 minute of no operation.
Application