Setting The Date And Time; Changing The Display Language - Olympus Stylus 1050 SW Instruction Manual

Setting the date and time

The date and time set here are saved to image
file names, date prints, and other data.
1
Press the o button to turn on
the camera.
●
The date and time setting screen is displayed
when the date and time are not set.
X
Y
----
CANCEL
Date and time setting screen
2
Use 12 to select the year for [Y].
X
Y
2008
CANCEL
3
Press the o button to save the
setting for [Y].
X
Y
2008
CANCEL
M D TIME
-- -- -- -- Y M D
MENU
M D TIME
Y M D
-- -- -- --
MENU
M D TIME
Y M D
-- -- -- --
MENU
4
As in steps 2 and 3, use 1234
and the o button to set
[M] (month), [D] (day), and
[TIME] (hours and minutes).
For precise time setting, press the o button
as the time signal strikes 00 seconds.
To change the date and time, make the
setting from the menu. [X] (Date/time)
(p. 45)
To check the date and time
Press the g button while the camera is
turned off. The current time and alarm time
are displayed for approx. 3 seconds.

Changing the display language

The language for the menu and error messages
displayed on the monitor is selectable.
1
Set the mode dial to a position other
than R, 6.
2
Press the  button, and press
1234 to select [x SETUP].
RESET
PANORAMA
EXIT
IMAGE
QUALITY
CAMERA
MENU SETUP
SILENT
S C N
MODE
SET OK
MENU
EN
1