Toshiba RAS-B10GKVP-E Service Manual page 126

Appendix
4. Cord heater installation work procedure
No. Photo / Explanatory diagram
Remove each cabinet, inverter assembly, motor base assembly, and partition board assembly.
1
* Do not damage the electric parts such as cables, connectors, etc. while this work.
1-1
1-2
Side cabinet (L)
1-3
1-4
Tel: 01823 665660
Heronhill - for all your Toshiba requirements
Upper cabinet
Valve cover
Water-proof
cover
Wiring cover
Front cabinet
Inverter assembly Side cabinet (R)
Appendix-4
www.heronhill.co.uk
Procedure
Remove the upper cabinet and the valve cover.
Related parts / Screws list
Part name
Screw type
Upper cabinet Ø4 × 8
Valve cover Ø4 × 1
Remove the front cabinet, the wiring cover and the
water-proof cover.
Related parts / Screws list
Part name
Screw type
Front cabinet Ø4 × 8
Wiring cover Ø4 × 8
Remove the side cabinet (R/L) and the inverter
assembly.
Related parts / Screws list
Part name
Screw type
Side cabinet (R) Ø4 × 8
Side cabinet (L) Ø4 × 8
Inverter assembly Ø4 × 8
Remove the inverter assembly.
No. Part name Connector No.
1 TE sensor CN600
2 TD sensor CN601
3 TO sensor CN602
4 TS sensor CN603
4-way valve
5 CN701
coil
6 PMV coil CN700
7 Fan motor CN300
Compressor
8
(Intermediate connector)
lead
Reactor
9
(Intermediate connector)
(2 pieces.)
Fax: 01823 665807
Used screw
Quantity
5
1
Used screw
Quantity
7
2
Used screw
Quantity
7
3
1
Connector color
White
White
White
White
Yellow
White
White
White
White