Toshiba RAS-B10GKVP-E Service Manual page 108

No. Part name
2 Front cabinet 1. Detachment
1) Perform step 1 in
2) Remove the fixing screws (ST1TØ4 × 8L
2. Attachment
1) Insert the claw on the front left side into
2) Hook the bottom part of the front right
3) Return the screws that were removed
Tel: 01823 665660
Heronhill - for all your Toshiba requirements
Procedure
.
1
2 pcs.) used to secure the front cabinet
and inverter cover, the screws (ST1TØ4
× 8L 3 pcs.) used to secure the front
cabinet at the bottom, and the fixing
screws (ST1TØ4 × 8L 2 pcs.) used to
secure the motor base.
• The front cabinet is fitted into the side
cabinet (left) at the front left side so
pull up the top of the front cabinet to
remove it.
the side cabinet (left).
side onto the concave section of the
bottom plate. Insert the claw of the side
cabinet (right) into the square hole in the
front cabinet.
above to their original positions, and
attach them.
– 108 –
www.heronhill.co.uk
Remarks
Front cabinet
Claw
Square hole
Concave section
Fax: 01823 665807