Table of Contents
Advertisement
4.2 Colour display
The colour display divided into three sections in any operating mode:
1
Header section: In the header section the current control area is shown (e.g. source, system,
internet radio etc.). On the right-hand side is the charging status of the integrated lithium-ion
battery (for an explanation of the charging status symbols please refer to section 1.8.1)
2
Content section: The content section is the central user interface of your RC 9 remote control
where both menu points of the currently accessed control area and graphical user elements
are being shown.
3
Footer section: In the upper part of the footer section you can both find the actual time and
informatin on the current connection statuss. The lower part of the footer section is divided into
four parts which can be assigned with socalled Hotkeys (please refer to sections 4.3 and 4.4.4
for detailed information on Hotkeys).
4.3 Hotkeys
The four hotkeys (4) offer direct access to a total of four devices of a currently active zone. All four
devices can be directly accessed from the lower part of the footer section. For details and an
explanation of the term "zone" please refer to section 4.4.2.
4.4 System Settings
To access the System Settings menu please press the Settings key (9). The following menu points can
be selected via the four Navigation keys (11) and the Enter key (10): "Device Selection", "Change
Zone", "System Information", "User Settings", "Start Pairing".
4.4.1 Device Selection
Under the menu "Device Selection" you can find all available and recently paired devices with their
respective names. Wih the navigation keys (11) please choose one of the devices from the list and
confirm with the Enter key (10). The menu point "Device Selection" is also shown when the RC 9
remote control is waking up from standby mode and hasn't already been connected with a device.
NOTE: Please note that only one device can be controlled by the RC 9 remote control at a time. If you
happen to choose another device, the connection to the formerly linked device will be interrupted.
4.4.2 Change zone
If you have multiple devices which can be controlled with the RC 9 remote control, you can group
those devices into several zones such as different rooms or appliance combinations. The "Change
Zone" option allows you to switch between different zones and is also available via the Zone menu (7).
Each zone is provided with four assignable Hotkeys (4) for a direct access to its four associated
devices (see 4.4.4 and 4.3).
4.4.3 System Information
The menu item "System Information" contains information on technical details of your RC 9 remote
control such as the current firmware version, serial number and more. Furthermore, the firmware of the
RC 9 remote control can be easily updated by pressing the red Option key (5). Please note that the RC
9 remote control needs a direct USB connection with a personal computer in order to conduct the
update process.
13
Hide quick links:
Advertisement
Table of Contents
