Display - AVM OVATION CD 8.2 Operating Instructions Manual

Tube warmup (CD 8.2)
Due to the warm-up phase of the integrated tube line stage, the power-on time of the CD 8.2
is extended by approx. 30 seconds.
CAUTION: When switched to stand by the unit is still connected to the mains. In case of a
thunderstorm or if you leave the house for a longer time, we recommend you switch the
amplifier off by using the mains switch (29) or pull the mains plug (28).

2.3 Display

When the unit is on, the display (9) shows information about the current settings and state of
your CD Player. Apart from informations about the operating status (CD Player, Digital Input
etc.) the lower line shows you currently active settings of the D/A converter: On the left-hand
side the sample rate (e.g. "192") and bit depth is displayed. On the right-hand side, you will
find the current filter setting (SMOOTH or STEEP).
2.3.1 Display in CD player mode
TRACK
On the left-hand side both the current title is displayed (big figures) and the total number of
available tracks of the inserted CD (small figures).
TIME
At the centre of the display the total duration of an inserted CD is displayed, while stopped
(STOP). As soon as the CD is played (PLAY) or paused (PAUSE), the time already elapsed of
the current track is displayed.
STATUS
On the right-hand side the current operating status is displayed (STOP, PLAY, PAUSE).
PROG
In case of a currently active track programming both the currently playing track and the total
number of programmed tracks is displayed on the left-hand side (for example "PROG 2/17").
RND
In case the random play mode is activated, the currently playing track and the total number of
programmed tracks are displayed on the left-hand side (for example "RND 5/12").
2.3.2 Display in D/A converter mode
On the left-hand side the name of the currently selected input is displayed. If there is no
incoming signal available at the currently selected input, NO DIG SIGNAL or NO USB
PLUGGED is shown right next to the input name.
10