Table of Contents
Advertisement
Delete Zone
The menu item "Delete Zone" provides a list of all existing zones and the possibility to delete these
along with all known data.
Transportation lock
The transportation lock deactivates the motion sensor and secures the RC 9 remote control against
unintentional power-up and thus saves battery while moving. In order to activate the transportation
lock please navigate to the menu item "Transportation lock" and press the Enter key (10). In order to
deactivate the transportation lock again, please press any key on your RC 9 remote control.
4.4.5 Pairing
In order to control your AVM device with your RC 9 remote control, both devices first need to be
linked. This process is also referred to as "Pairing". in order to start the pairing process, please switch
off your AVm device by using the mains switch (34) on the rear side of the unit. Now please navigate to
the "Systems Settings" menu on your RC 9 remote control by pressing the Settings key (9) and
navigate to the menu item "Start Pairing" without selecting it with the Enter key yet. Switch on your
AVM device by using the mains switch (34) on the rear side of the unit and immediately press the Enter
key of your RC 9 remote control (10). The name of a succesfully detected device (such as your MP 5.2)
will instantaneously be shown on the display of your RC 9 remote control and can be edited by using
the alphanumeric input keys (25). After confirming the name of the paired device, you can also choose
one of four available Hotkeys (see 4.3.). By pressing the Enter key (10) again, the pairing process is
completed.
4.5 Source Menu
As soon as a connection between your RC 9 remote control and your AVM device has been
established (for details please refer to section 4.4.5), the Source Menu offers a choice of available
sound sources such as "Internet Radio", "Audio Server", or "Local Input". The Source Menu can be
accessed by pressing the Home menu key (9) on your RC 9 remote control. In addition to the
possibility of selecting a sound source, the Source Menu also offers a menu item named "Receiver
Settings" where system settings o the included streaming module of your AVM device can be edited
(Network, Software, Quick Start, Clock).
4.5.1 Receiver Settings
The menu item "Receiver Settings" offers a series of useful options to configure your AVM device
(Network settings, Software Updates, Quick Start Function, Time etc.).
Network
By selecting the menu item "Network Status" you get access to a number of current information on an
established network connection such as Connection Type, IP address, Subnet Mask, Gateway IP.
By selecting the menu item "Wlan Status" you get access to a number of current information on an
established wireless connection such as Signal Quality, WiFi channel, and Encryption type.
By selecting the menu item „MAC-Adress", the current MAC address of your AVM device is being
displayed. This name is used as a reference for other computers located in the same network (UPnP).
The menu item „IP Settings" offers you the choice between an automatically assigned IP address
("Automatic (DHCP)") or a manual IP address ("Manual input"). Unless you are an expert with a good
understanding of local network protocols, we strongly recommend to choose the "Automatic (DHCP)"
option. When in doubt, please consult your local dealer who may help you to set up your network
configuration.
The menu item „Wlan Settings" provides a list of all available wireless networks (SSIDs) which can be
accessed with the navigation keys (11) and selected by pressing the Enter key (10). After entering the
15
Hide quick links:
Advertisement
Table of Contents
