Table of Contents
Advertisement
Disassembly
Removing and Replacing the Keypad
26
1.
Remove the battery cover, battery, rear housing, and transceiver PC board, as
described in the procedures.
2.
Lift the keypad up from one corner as shown in Figure 12 and remove it from
the front housing.
Front Housing
Figure 12. Removing and Replacing the Keypad
3.
To replace, align the keypad with the front housing and press it into place.
4.
Replace the transceiver PC board, rear housing, battery, and battery cover as
described in the procedures.
Keypad
April 21, 2004
E398/E399 GSM
Plastic
Tweezers
6809480A37-O
Advertisement
Table of Contents
Troubleshooting
